Configuring Snow Leopard for Konica Minolta 2300DL Printer
After much searching online for linux type installations, dangerous hacks and other really involved installation proceses I figured there had to be an easier way. Turns out I was right. I simply installed the drivers for the 2430 printer and attached those to the setup process and was up and running in a matter of minutes.
Here’s how:
1. Start off by visiting Konica Minoltas site and downloading and installing the OS X drivers, found here:
https://printer.konicaminolta.com/support/current_printers/mc2430dl_sup.htm
2. Open “Print & Fax” located in System Preferences and click the + to add a new printer. You should see your 2300DL located under the Default tab, select it and choose “Select Printer Software…” from the Print Using option. Follow the onscreen options and you are all set. Its really that simple.
I hope this helps save someone time as I spent a good 2 hours trying to find the perfect solution.
Disclaimer: The driver installed is for the newer 2430 printer so there could be issues, use at your own risk.
No Comments